FBT Audio JMaxX 110A Active Loudspeaker The JMaxX 110A features a 10″ LF woofer with 2″ voice coil 1 exit throat HF compression driver with 1 voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected moulded polypropylene cabinet. 129.5 dB SPL. The new FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, the JMaxX 110A is actually four loudspeakers in one. Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing. The JMaxX 110A features FBT’s latest generation lightweight 700W 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion. Key Features: 10″ LF woofer with 2” voice coil 1″ exit throat HF compression driver with 1″ voice coil Frequency response from 58Hz to 20 kHz Extremely lightweight: only 11Kg 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate 90°H x 60°V constant directivity horn Stage monitor angling facility with 12°, 40° or 55° taper Manufacture Specification: Configuration: 2 Way Frequency response: 58Hz – 20kHz Low frequency woofer: 10″ (2″ VC) High frequency driver: 1″ (1″ VC) Maximum SPL cont/peak: 129.5 dB Dispersion: 90 x 60 Input connector: XLR 6.3mm Jack Net Weight: 11kg Built-in amplifier LF/HF: 700w/200w Power cord: 5m IEC This item is brand new. It comes sealed in retail packaging. 2 Year manufacture warranty included as standard 3 years upon registration. Demonstration of various FBT Audio models available at our London Show Room, Located at Unit 5, SE9 3TL Part exchange accepted – contact us for details. Have any questions? Use the contact links above and we will be happy to help!
